manualshive.com logo in svg

Nautel NX50, Руководство по эксплуатации и обслуживанию, Страница: 13 / 166

Поделиться
Скачать
Nautel NX50 Скачать руководство пользователя страница 13

NX50 Operations and Maintenance Manual

Description

Issue 3.3  2016-02-08

Page 1-5

Control/Monitor Stage

See electrical schematic 

SD-3 

and 

Figure 1.2

.

The control/monitor stage monitors critical signal samples and status/alarm signals from the exciter 
stage, RF power stage, and ac/dc power stage. For example, RF power monitoring and RF power 
stage status information is applied to the control/monitor stage. Based on the value and status of 
each input, the control/monitor stage produces the appropriate control signals for the exciter stage 
and the RF power stage to ensure the proper operation and protection of the transmitter.

All analog and digital program inputs are applied to the transmitter via the control/interface PWB for 
distribution to the exciter stage.

A 17-inch, colour LCD screen mounted on the front of the control cabinet provides an advanced 
user interface (AUI) for the transmitter. The AUI can be controlled by touch screen and is also 
available as a flash graphic on any web-interfaced PC or handheld device via the internal NX web 
server. See 

“Using the AUI” on page 2-2

 for detailed information on AUI functionality.

The control/interface PWB contains push-button switches that provide backup control for the RF 
on/off and local/remote functions.

Figure 1.2: Control/Monitor Stage

From RF Power Stage

From Ac/Dc Power Stage

AUI

To RF Power Stage

To Ac/Dc Power Stage

Control/

Interface

PWB

To Exciter Stage

From Exciter Stage

Содержание NX50







































































































































































Отзывы:

Нет отзывов