manualshive.com logo in svg

Nautel NX50, Руководство по установке

Поделиться
Скачать
Nautel NX50 Скачать руководство пользователя страница 63

NX50 Installation Manual

Pre-installation / Installation assistance

Issue 6.1  2021-07-13

Page 11-1

Section 11:  

Pre-installation / Installation 

assistance

Nautel provides a number of support options to help you during pre-installation planning and 

preparation: 

•

Pre-installation consulting

•

Installation and commissioning service

•

Online documentation - see page 11-3

•

On-site support - see page 11-3

•

Training - see page 11-3

•

Standard warranty - see page 11-4

•

Extended warranties - see page 11-7

Pre-installation consulting 

Nautel field support specialists are available to answer questions and work with you to ensure 

that your site will be ready for the installation of your NX50 transmitter. For support, contact 

Nautel Customer Service and request assistance (

“On-site support” on page 11-3

).

Installation and commissioning service

Nautel offers an installation and commissioning service to customers who want assistance with 

configuring and commissioning a new Nautel transmitter. After the customer completes the 

transmitter assembly and installation, Nautel technical personnel will spend up to three days 

on-site to help make the ac power, RF and remote connections, and to assist with the 

configuration and testing of Nautel equipment.

The customer is responsible for ensuring that the following stages of installation have been 

completed, prior to the arrival of Nautel personnel:

Содержание NX50











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды