Nautel NX5 AM, Руководство по эксплуатации и техническому обслуживанию

Страница: 195 / 220

NX5 OPERATION & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-08-01 PAGE 3.2.175
Enabling the Scheduler
You can enable or disable the scheduler using the remote AUI (see Enabling the Scheduler - Remote AUI )
or using the local front panel UI (see Enabling the Scheduler - Front Panel UI, on page 3.2.175 ).
Enabling the Scheduler - Remote AUI
Enable or disable the scheduler by clicking the
Scheduler
button in the Date & Time section (see
Figure 3.2.160 ).
Figure 3.2.160: Enabling/disabling the scheduler - Remote AUI
When
Scheduler: ON
appears, the transmitter will follow the Scheduler settings.
When S
cheduler: OFF
appears, the transmitter will stop following the schedule and the active preset
will be the preset that was operating when the scheduler was disabled.
Enabling the Scheduler - Front Panel UI
To view the
Scheduler
enable/disable screen (see Figure 3.2.161 ) on the front panel display, select
User
Settings -> Scheduler
from the
Main Menu
.
Figure 3.2.161: Enabling/disabling the scheduler - Front Panel
Use the up and down buttons to select
ON
(enable) or
OFF
(disable). The default setting is
OFF
. Press
cancel (
X
) to return to the previous menu.