Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Страница: 83 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-03-01 PAGE 3.2.65
Managing Presets - Using the Front Panel
The
Select Presets
screen (see Figure 3.2.42 ) and
Edit Presets
screen (see Figure 3.2.43 ) allow users to
view operational data (power level, frequency, mode, program input characteristics), plus create and
control preset settings. Users can create up to 62 presets or edit existing presets. This section includes
the following topics:
 Selecting the Active Preset
 Editing or Creating Presets
Selecting the Active Preset
When you choose
Select Preset
from the
Main Menu
(see Figure 3.2.42 ) you can select the active
preset for transmitter operation.
Figure 3.2.42: Select Preset screen
Use the up and down buttons to scroll through the existing presets. Press the accept (checkmark)
button to enable the preset as the transmitter’s active preset. Press the cancel (
X ) button to return to
the previous menu.
Editing or Creating Presets
When you select
User Settings -> Edit Presets
from the
Main Menu
(see Figure 3.2.43 ) you can
create up to 63 operating presets or edit existing presets.
Figure 3.2.43: Edit Presets screen
Use the up and down buttons to scroll through the existing presets, or scroll to the bottom of the list to
Create New Preset
(see Figure 3.2.44 ). Press the accept (checkmark) button to enter the editing menu
for that preset (see Figure 3.2.45 on page 3.2.66 ). Press the cancel (
X
) button to return to the previous
menu. When you create a new preset, the next available preset number is assigned (e.g., Preset 5).
Indicates the preset
is the active preset