Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Страница: 186 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.168 VERSION 0.1 2015-03-01
Changing Exciter Transfer Settings
If your transmitter contains dual exciters and is configured to operate with dual exciters, you can
control the auto exciter transfer function using the remote AUI (see
Exciter Changeover Settings - Using
the AUI ) or using the local front panel display (see Exciter Changeover Settings - Using the Front Panel, on
page 3.2.169 ).
Exciter Changeover Settings - Using the AUI
To view the Changeover page (see Figure 3.2.148 ), select Changeover from the Menu options or click
on the Active Exciter area in the top, right-hand corner of the AUI. The Changeover page is only
displayed on the Main Menu window and the Active Exciter click shortcut is only available when dual
exciters are installed and configured.
NOTE
: In order to edit any changeover settings, the transmitter must be configured for
Dual Exciter (A/
B)
in the front panel UI’s HW Config -> Installed Exc screen (see Installed Exciter, on page 3.2.137 ).
Figure 3.2.148: Changeover page
 The Active Exciter is displayed (also displayed in the top, right corner of the AUI).

For
Main Exciter
, select
A
or
B
.
 For Auto Changeover Enabled , select Yes if automatic changeover is desired or No if user
selected/manual changeover is desired.
NOTE
: If the standby exciter must be removed for service, Nautel recommends you set Auto Changeover
Enabled to No while the standby exciter is unavailable for operation, instead of temporarily setting
Standby Exciter to No
.