Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Страница: 155 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-03-01 PAGE 3.2.137
Installed Exciter
From the front panel UI, you can configure the transmitter for the number of installed exciters. If you
have upgraded your transmitter to dual exciters, you may have already been prompted to change this
configuration. To view the
Installed Exc
screen, select
System Settings -> HW Config -> Installed
Exc
from the
Main Menu
(see Figure 3.2.119 ).
Figure 3.2.119: Installed Exciter Screen
Use the up and down buttons to select the appropriate exciter configuration - Exciter (A) or Dual Exciter
(A/B). Press the accept (checkmark) button to save the change. Press
X
to abort the change and return
to the previous menu.
LVPS Hardware
From the front panel UI, you can configure the transmitter for the number of installed LVPS modules. If
you have upgraded your transmitter to dual LVPS modules, you may have already been prompted to
change this configuration. To view the
LVPS Hardware
screen, select
System Settings -> HW Config
-> LVPS Hardware
from the
Main Menu
(see Figure 3.2.120 ).
Figure 3.2.120: LVPS Hardware Screen
Use the up and down buttons to select the appropriate LVPS configuration - Single LVPS: 1A , Single
LVPS: 1B , Dual LVPS: 1A/1B , 3 LVPS: 1A/B & 2A , or 4 LVPS: 1A/B & 2A/B . Press the accept (checkmark)
button to save the change. Press X to abort the change and return to the previous menu.