Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Страница: 140 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.122 VERSION 0.1 2015-03-01
Setting User Permission Level
There are four levels of permission that can be assigned to users, each with their own specific function.
All users have permission to change their own username and password, but are otherwise limited to
the following functions:

View Only
: Can monitor equipment data only. No administrative or control functions.

Full Control
: Can monitor and control equipment, with no administrative functions.

Administrator
: Can perform all functions.
Administrator
is the only permission level that allows
addition, removal or modification of users.

Custom:
Administrator can customize the user permissions by manually selecting the permission
levels.
Editing Account Information
Adding an Account
You must be an
Administrator
to use this function.
Procedure to add a user (see Figure 3.2.105 on page 3.2.124 ):
1. Open the
User Accounts
page.
2. Click
Add
(bottom of the screen) to open a small
Add User
window.
3. Beside
Username
, enter a name that identifies the new user, and click
OK
.
4. Select the new user to edit the settings.
5. Beside
User Type
, press the arrow to reveal a drop-down menu and select a type of user. If you
select
Custom
as the type of user, then go to the
Permissions
section of the screen and mark
individual permissions (see Changing Permissions, on page 3.2.123 ).
6. Click
Apply
to confirm your entries and create a new user or click
Cancel
to ignore your entries
and exit the small window without creating a new user.
Editing an Existing Account
To edit an existing user account, click on the desired user in the
Users
list on the left-side of the AUI.
The
Settings
for that user will be displayed on the right-hand side of the AUI. You can edit the
Password, User Type
(see Setting User Permission Level above),
Auto Login
status and
Permissions.