Nautel NV15LT, Руководство по установке

Страница: 58 / 78

NV20LT/NV15LT INSTALLATION MANUAL COMMISSIONING
PAGE 2.9.10 VERSION 4.0 2018-02-26
Figure 2.9.6: Network Settings screens
Set during factory testing; cannot be modified
Set to
ON
if your network has a DHCP server. Automatically
assigns IP, netmask, gateway and nameservers.
Set to
OFF
if you do not have a DHCP server or if you wish
to assign static addresses.
All addresses shown are for
reference purposes only
Specify a nameserver (or DNS) to enable the use of
host names. If no nameserver is entered, only direct IP
addresses can be used to configure the emai l server
and any live streams such as Livewire or Shoutcast.
Typical netmask address shown. Consult with your
network administrator.
Specify the AUI port # for port forwarding. 3501 is the
default port number.
NTP = Network Time Protocol.
Set to
ON
to allow the network to synchronize to the trans-
mitter time.
Set to
OFF
to use the transmitter’s internal time reference.
Specify the IP address. Consult with your network
administrator.
Specify the gateway address. Consult with your
network administrator.