Nautel NV15, Руководство по эксплуатации и обслуживанию

Страница: 153 / 166

NV15/NV20 Operations and Maintenance Manual Non-standard maintenance
Issue 3.2 2013-10-01 Page 4-3
Laptop IP setup
The following steps assume the operating system is Windows XP. Adapt as required for computers
with different operating systems.
1. On the laptop go to
Start Menu
/
Control Panel
/
Network Connections
/
Local Area
Network
.
2. In the Local Area Network Status, open the
General
tab and choose
Properties
. Scroll down
and highlight
Internet Protocol (TCP/IP)
. Choose
Properties
.
3. In the Internet Protocol (TCP/IP) Properties window, select
Use the following IP address
.
4. Enter the following settings:
– IP Address: 10.10.10.1
– Subnet Mask: 255.255.255.0
– Default Gateway: 192.168.1.2
5. In the Internet Protocol (TCP/IP) Properties window, select
OK
.
6. In the Local Area Connection Properties window, select
OK
.
7. In the Local Area Connection Status window, select
Close
.
8. Close the Network Connections window.
Transfer software upgrade file to transmitter
1. If using a laptop, connect the laptop network interface card to the transmitter LAN port
(A1J21 on the control/interface PWB) using a CAT5 Ethernet cable. Open Internet
Explorer and search for 10.10.10.2. The transmitter login screen should appear.
2. If using a network computer, open Internet Explorer and search for the IP address recorded
in Step 2 of “Transmitter IP configuration” on page 4-2 . The transmitter login screen should
appear.
3. In the Internet Protocol (TCP/IP) Properties window, select
Use the following IP address
.
4. At the transmitter login screen enter:
– User: “Nautel” or “****”, where **** is the user assigned user name
– Password: none (default) or “****”, where **** is the user assigned password
5. Navigate through the AUI to
Menu
/
System Settings
/
Upgrade Software
and press
Browse
. Locate the software update
*.tgz
file and press
Upload
to load the file into the
transmitter boot image list.