Nautel GV5, Руководство по эксплуатации и техническому обслуживанию, Страница: 53 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.36 VERSION 0.2 2014-07-23
Transmitter Alarms and Log - Using the Controller UI
When you select
View Status -> View Alarms
or
View Status -> View Log
from the
Main Menu
(see
Figure 3.2.21 ), you can view various active or logged events, respectively, of the GV5/GV3.5. These
parameters are likely displayed on multiple pages and require that you scroll to view all of them.
NOTE
: This screen is for viewing purposes only and does not offer the same level of analytical features
as the AUI’s Logs page (see Figure 3.2.13 on page 3.2.28 ).
Figure 3.2.21: View Alarms and View Logs Screens
The
View Alarms
screen displays only alarms that are currently active. Older alarms that have cleared
may still be present in the
View Log
screen.
Use the up and down buttons to scroll through the list of alarms or logged events.
Refer to the GV5/GV3.5 Troubleshooting Manual to cross-reference the alarm name to possible causes
and troubleshooting tips.
When you select
Clear Log
from the
View Status
menu, you will delete all logged events.
Use the
Reset Alarms
command in the front panel UI’s
Main Menu -> Reset Alarms
screen to
attempt to clear any latching alarms that are holding the transmitter in an “off-air” state. If the
offending alarm has cleared, the transmitter should resume operation. See
Resetting Alarms, on page
3.2.98 .