Nautel GV40, Руководство по установке

Страница: 21 / 68

GV40/GV30 INSTALLATION MANUAL INSTALLING OPTIONS
VERSION 5.0 2021-03-01 PAGE 2.3.1
SECTION 2.3: INSTALLING OPTIONS
The GV40/GV30 transmitter is factory configured and shipped to operate with the customer’s desired ac
power source voltage and RF output connector size. There are options available for various other
features, including dual exciter, internal audio processor and UPS interface. These options may be
installed in one of two ways:
 You install and configure options at your site, using kits and instructions provided by Nautel. Each
option has a separate kit.
 Pre-arrange for Nautel to install and configure options at the factory prior to shipping.
Table 2.3.1 shows the standard (default) of the GV40/GV30, as well as the available options. Each
option references a schedule of installation and how to install the option. Review the options to
determine which, if any, apply to your installation.
If you did not purchase any options for your GV40/GV30 and intend to operate with the standard
(default) configuration, proceed to
Section 2.4, “Connecting to Station Reference Ground” .
NOTE
: When an option is installed (UPS interface, dual exciter, etc.), the extra parts removed (e.g.,
blank exciter panel, AC LED cover) from the original configuration are placed in the Ancillary kit.
Table 2.3.1: GV40/GV30 Available Options
ITEM/
FEATURE STANDARD
CONFIGURATION AVAILABLE
OPTIONS WHEN TO
INSTALL?
HOW TO INSTALL?
Exciter Exciter A (NAE107*) Exciter B (NAE107*) Station
convenience
See
“Upgrading to Dual
Exciter” on page 2.3.2
LVPS 3 LVPS 1A/B and 2A
(UG132)
One redundant LVPS 2B
(UG132) Station
convenience
See
“Redundant LVPS
Upgrade” on
page 2.3.3
UPS Interface No UPS interface UPS Interface Assembly and
ac input connector
(219-5178-01); user
provides UPS and wiring Station
convenience
See
“Installing the UPS
Interface” on
page 2.3.4
Internal Audio
Processor No internal audio
processor Orban Inside Kit(s) (for one
or both exciters, as desired) Station
convenience
See
“Installing the
Orban Inside Card” on
page 2.3.5