Nautel GV3.5, Руководство по эксплуатации и техническому обслуживанию, Страница: 178 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.161
Setting User Thresholds
You can set thresholds for the main audio and SCA sources (trip level and timeout) and forward power
level using the AUI (low and very lower power thresholds) (see Setting User Thresholds - using the AUI ) or
using the controller UI (see Setting User Thresholds - using the Controller UI, on page 3.2.163 ). These
thresholds determine the limit for an associated low audio or low forward power alarm to be activated.
If you change a user threshold on the controller UI, it will also be reflected on the AUI, and vice versa.
Setting User Thresholds - using the AUI
The AUI’s
User Thresholds
page (see Figure 3.2.138 ) has two tab sections -
Low Audio
and
Low
Forward Power
.
Figure 3.2.138: User Settings - User Thresholds Page and tab sections
Valid range -100 to -3 dB
Valid range 0 to 600 s
Valid range -100 to -3 dB
Valid range 0 to 600 s
Valid range 0 to 100%
Valid range 0 to 100%
Default
shown
values