Nautel Exporter Plus, Техническое руководство по эксплуатации, Страница: 96 / 186

Exporter Plus Technical Instruction Manual Operating
Page 8-26 Issue 1.0 2020-05-05
Setting Ethernet 0 or 1 IP address
When you select
Eth 0 IP Address
or
Eth 1 IP Address
from the
NETWORK CONFIG
menu (see
Figure 8.49 ) you can set the IP address associated with either Ethernet port.
Figure 8.49: Ethernet 0 or 1 IP Address Screen
To change the Ethernet port IP address, press the checkmark (accept) button to enter the
editing screen shown in Figure 8.50 .
Figure 8.50: Ethernet 0 or 1 IP Address Editing Screen
Use the right and left buttons to highlight the desired digit in the new address, then use the up
and down buttons to change the value of the highlighted digit. Press the accept or cancel
button to enter the Save/Cancel screen (see Figure 8.4 on page 8-5 ). Save or cancel as desired.
Setting Ethernet 0 or 1 netmask
When you select
Eth 0 Netmask
or
Eth 1 Netmask
from the
NETWORK CONFIG
menu (see
Figure 8.51 ) you can set the netmask address associated with either Ethernet port.
Figure 8.51: Ethernet 0 or 1 Netmask Screen
To change the Ethernet port netmask address, press the checkmark (accept) button to enter the
editing screen shown in Figure 8.52 .