Nautel Exporter Plus, Техническое руководство по эксплуатации, Страница: 89 / 186

Exporter Plus Technical Instruction Manual Operating
Issue 1.0 2020-05-05 Page 8-19
Figure 8.32: Leap Seconds Editing Screen
Use the right and left buttons to highlight the desired digit in the leap seconds, then use the up
and down buttons to to change the digit as desired. Press the accept or cancel button to enter
the Save/Cancel screen (see Figure 8.4 on page 8-5 ). Save or cancel as desired.
Setting pending leap seconds
Enter the pending leap second adjustment for the time setting by selecting
Pend Leap Sec
from
the
DATE & TIME
menu (see Figure 8.33 ).
Figure 8.33: Pending Leap Seconds Screen
To change the pending leap seconds value press the checkmark (accept) button to enter the
editing screen shown in Figure 8.34 .
Figure 8.34: Pending Leap Seconds Editing Screen
Use the right and left buttons to highlight the desired digit in the pending leap seconds, then
use the up and down buttons to to change the digit as desired. Press the accept or cancel button
to enter the Save/Cancel screen (see Figure 8.4 on page 8-5 ). Save or cancel as desired.