User & Service Manual
Xltek® Trex HD Amplifier
17
3.2. Electrical Warnings and Cautions
XLTEK
systems are intended for connection to a properly grounded electrical outlet only.
Conductive parts of electrodes and their connectors are not to contact other conductive parts
including earth.
Do not place MULTIPLE PORTABLE SOCKET-OUTLETS (MPSOs) on the floor.
Do not connect additional MPSOs or extension cords to the Trex HD system.
Do not use the MPSO with the Trex HD system for supplying power to any equipment that is
not part of the system.
To avoid the possible hazards caused by the summation of leakage currents when all the
parts of the system are interconnected, no equipment other than devices connected to the
Trex HD may be powered by the isolation transformer.
The current rating of the isolation transformer must be sufficient to operate all of the devices
powered by it. Refer to the current ratings of the isolation transformer and current rating for
each individual device connected.
Do NOT connect non-medical equipment which has been supplied as part of the system
directly to the wall outlet when the system is supplied, via MPSO, with a separating
transformer.
Do NOT connect electrical equipment which has not been supplied as a part of the system to
the MPSO.
ELECTRICAL SHOCK HAZARD:
Do
NOT
turn on the system power until all cables have
been connected, verified and visually inspected for any damage. Failure to inspect the cables
may result in electrocution. Verification of electrical safety should be performed routinely.
ELECTRICAL SHOCK HAZARD:
Do
NOT
service the system. Refer servicing to qualified
personnel only. Do
NOT
use repaired components without proper testing.
Содержание Xltek Trex HD
Страница 1: ...Xltek Trex HD User Service Manual ...
