natus UltraPro S100, Руководство пользователя, Страница: 67 / 88

September 13, 2018 4-11
Performing an Exam
Calculate the velocity
•
Distances may be entered after each site has been acquired, or all distances may
be entered after all sites have been acquired.
•
Enter distances in cm to one decimal place (e.g., 23.5cm / 235mm)
•
The distance entered will be displayed in the Results Table in the
corresponding Distance field.
•
Press Enter to accept the distance and to calculate the conduction velocity.
Note: You can enter Default Distances using the protocol table. Conduction
Velocities will then be calculated automatically.
Trace analysis and
display
You can use the full screen to examine your traces.
1. Select Display > Full Trace Area ON or double-click the Header bar.
Displaying large
Results Tables
Results can be seen on screen immediately, as you acquire data. If columns on the
table are not in view, either scroll the table or select
Results > Full Results from the
menu bar to see full tables and graphs. or double-click the Header bar.
Graphs
Up to two graphs can be displayed on the test screen. Up to six graphs can be
displayed in the full screen RESULTS view.
1. Select Results > Graph Options to choose the results you want to view.