User & Service Manual
Trex™ HD Monitoring Amplifier
41
9.2.2. Lanyard Setup
To use the lanyard setup:
1. Attach the lanyard to the two (2) rings on the back of the pouch.
2. After attaching the electrodes to the patient, place the Trex HD Monitoring into the pouch with the
electrode wires exiting at the top or on the sides, as required.
3. Close the zippers as much as possible so that the Trex HD Monitoring is secured in the pouch.
4. Once the Trex HD Monitoring is enclosed in the pouch, place the lanyard over the patient’s shoulder,
or hang it on the bedside post.
5. Insert the patient event button into the holder on the side of the pouch and the gather the electrodes
into a ponytail.
Note:
If a power pack is being used, enclose it in the Trex HD Monitoring pouch with
the Trex HD Monitoring in Step 2.