natus OLYMPIC SMART SCALE 50, Инструкция по эксплуатации

Страница: 14 / 64

2-2 OLYMPIC SMART SCALE Model 50/51 Instruction Manual
Installing the Smart Scale
To permanently lock the units to kilograms:
1
Press
ON/OFF
on the front panel to turn on the scale.
2
Press
KG/LB
until kilograms are selected.
3
Press
ON/OFF
to turn off the scale.
4
Lift and turn over the scale to gain access to the
KG/LB
disabling switch. With
the scale oriented as shown in Figure 2.1, you can access the switch through the
3/8” hole on the right side of the bottom of the scale.
Figure 2.1
Bottom of Smart Scale —
KG/LB
disabling switch
5
Flip the
KG/LB
disabling switch to the left.
6
Press
ON/OFF
to turn on the scale.
The units are now locked to kilograms.
7
Press
KG/LB
to verify that the units are locked to kilograms.
If locked, the display should still show kilograms.
8
Place the Locked to KILOGRAMS label over the
KG/LB
switch.
Attaching the Smart Scale to Its Cart (Mobile Base)
Required Items:
„
Smart Scale
„
Cart (mobile base)
„
Probe
„
Mounting hardware
Access to KG/LB disabling
switch
NOTE
#
Natus Medical manufactures a cart (mobile base) for the Smart Scale Model 50.
The Model 51 is the Smart Scale Model 50 with this cart.
CAUTION
Before using the scale on a cart, securely attach the Smart Scale to the cart as described
in the following instructions.
NOTE
#
The mounting hardware (four #10-32 screws, washers, and nylon spacers) and caution
label is taped to the inside of the cart.