natus neuro Brain Monitor, Руководство пользователя и обслуживания, Страница: 36 / 61

User and Service Manual Natus® Brain Monitor &
Embla Dx Series™
35
Amplifier Usage and Features
Getting Started
NOTE: In the event of a power failure, the current recording will resume using the last
programmed settings upon the restoration of power.
Placement of the Operator and Patient
It is expected that the operator of the system will stand or sit in front of the computer, but not
continuously. The patient is typically lying in a bed located beside the system cart or amplifier and is in
no way supported by the equipment.
Amplifier units can be patient-worn. Refer to the section Adding the breakout box to a pouch for details
on the placement of the breakout box on the patient.
At no point should the system be leaned against or rested upon. Refer to the Transport System
Specifications and Maintenance section for placement, details, and cautions for the different cart
transportation options.
Refer to the corresponding Instructions for Use for all system components prior to use. This should
include, but is not limited to: cameras, computers, stimulators, and software.
Beginning a study
Once the equipment has been installed by your Natus qualified representative and a patient has been
connected to the system, a new EEG or Sleep study can be started. For details on beginning a new EEG
or Sleep study, consult the
NeuroWorks/SleepWorks reference manuals directly.
NOTE: In order to record a study the base unit must be connected to a PC and the base unit
must be connected to the breakout boxes via the patient cable.
The Running study screen displays.