For Otosuite installation instructions, see the Otosuite Installation Guide, on the Otosuite installation medium.
Warning
•
To connect Madsen A450 to the PC, use the supplied USB cable. The cable length must not
exceed 3 m (approx. 10 feet).
Desktop or wall-mount installation
You can place Madsen A450 on the desktop or mount it on the wall.
•
Connect the accessories and external power supply to the device. Follow the instructions in
.
Desktop installation
1. Place Madsen A450 on the desktop.
A.
External power supply cable
B.
USB cable between Madsen A450 and the PC
Note
•
Connection cables for accessories connected to Madsen A450 are not shown. See
.
Wall-mount installation
It is recommended that you connect the external power sup-
ply and the accessories before you mount Madsen A450 on
the wall.
2. Select two suitably sized screws that will pass through the
wall-mount holes on the back of the device:
Max. screw diameter 4.3 mm (0.15 in).
Max. screw head diameter: 9 mm (0.35 in).
3. The distance between the two wall-mount holes on the
back of the device is 24 cm (9.4 inches), measured from
the center of each hole.
4. Mark up the two holes on the wall and make sure that the
device will be placed horizontally.
5. Fix the two screws in the wall.
6. Hang Madsen A450 on the screws.
Madsen A450
77
6 Unpacking and installing