Cabling the Components
July 14, 2016
3-3
Removing the ErgoJust cart video pole
The ErgoJust video pole may on occasion need to be removed during transportation to fit the cart
through an unusually small entryway, access cables inside the video pole, or replace the video pole.
It is recommended that this operation by performed by two persons to avoid
injury or damage to the equipment.
Remove the optional
Natus Photic
Stimulator
1. Lock the swivel arm in the folded position (Figure 1).
2. Wrap the Velcro strip around the swivel arm.
3. Loosen the swivel arm securing knob.
4. Carefully lift and set the swivel arm aside on a clean surface.
Figure 1: Removing the swivel arm.
NOTE:
To completely detach the photic stimulator, unplug the power supply and remove the
power cable from the cable channel.
5. Unplug the video camera cable (Figure 2).
6. Unplug the video camera and IR light power cables.
Figure 2: Unplug video camera cable and video camera and IR light power cables.
