Nature's Miracle NMA500, Руководство пользователя

Страница: 11 / 24

11
Filling Litter Tray
1. Fill your box so the litter level is between the MIN and MAX fill lines
on either side of the litter box.
2. Use the scoop & rake cleaner to evenly distribute litter in the litter tray.
Tip: To measure litter at the center of the box, insert
the scoop & rake cleaner, scoop down, into the center
of the litter tray. The Fill Line on the scoop is even with
the MAX fill line on the tray (E).
Important: Do not overfill unit or it will not
operate properly.
Attaching Paw Cleaning Ramp
1. The paw cleaning ramp has two notches that snap onto the paw
cleaning ramp attachment posts on the top housing, directly in
front of the waste receptacle compartment cover.
2. Position the paw cleaning ramp with the carpet
side facing up.
3. Place the notches over the paw cleaning ramp
attachment posts on either side of the unit (F).
4. Tug slightly on ramp to ensure that it is firmly
in place.
Daily Use
1. Remove AC adapter from packaging and plug into the AC adapter
outlet at the back of the top housing. Plug cord into a standard
electrical outlet.
2. Turn the ON/OFF switch to ON; the mode indicator light will turn on.
Note: The rake will automatically run through a cleaning cycle to
smooth out litter.
3. For daily use, your cat enters the litter box. Once it leaves, the motion
sensors will activate CLEANING cycle. (Sensors must be blocked for
at least 10 seconds to activate CLEANING cycle.)
Important: Unit will not start CLEANING cycle while cat is in the box.
4. After 20 minutes, cleaning starts and the automatic rake moves
forward and back to scoop waste clumps into the waste receptacle.
Note: If the cat reenters and leaves the litter box before the initial
20 minutes have past, the timer will automatically reset and delay
the rake action for an additional 20 minutes.
Note: Rake will stop and reverse direction if the safety bar touches
any object behind the rake as it cycles.
Fill Line E
F