CHALKBOARD PANEL: POST MOUNT
COMPONENTS
PANEL INSTALLATION
NATURE'S INSTRUMENTS NI-PG-301-01 POST MOUNTED CHALKBOARD PANEL. NI PACKAGE INCLUDES:
203mm [8"] Ø CONCRETE SONOTUBE FOOTINGS ARE NOT SUPPLIED.
·
89 x 89mm [4"x4"] CEDAR POST:
x2
·
PRE-ASSEMBLED CHALKBOARD PANEL:
x1
··
PAINTED BOTH SIDES, FRAMED IN CEDAR TRIM
·
PRE-ASSEMBLED CEDAR BASE-'T':
x1
·
38 x 140mm [2"x6"] CEDAR CAP:
x1
·
64mm [2
1
2
"] BROWN DECK SCREWS:
x36
1.
FASTEN THE POSTS TO EACH SIDE OF THE CHALKBOARD
PANEL USING SUPPLIED SCREWS FASTENED THROUGH
PRE-DRILLED HOLES IN THE PANEL FRAME (FRONT &
BACK).
2.
TOP OF POSTS TO BE FLUSH WITH THE TOP OF THE
FRAME.
3.
FASTEN THE BASE-'T' TO THE BOTTOM OF THE PANEL
USING SUPPLIED SCREWS THROUGH PRE-DRILLED HOLES IN
THE PANEL FRAME (FRONT & BACK).
3.a.
BASE-'T' TO BE FLUSH WITH FINISHED SURFACE.
FASTEN CAP TO THE TOP OF THE PANEL USING
SUPPLIED SCREWS THROUGH PRE-DRILLED HOLES IN
THE PANEL FRAME (FRONT & BACK).
4.
IF INSTALLED AGAINST A WALL OR FENCE, THE CAP MUST
BE FLUSH WITH THE BACK OF THE PANEL FRAME WITH
25mm [1"] OVERHANG ON BOTH SIDES.
4.a.
IF INSTALLED FOR CIRCULATION ON ALL SIDES, THE
CAP CAN BE CENTERED ON POSTS FRONT TO BACK.
5.
FOOTING HOLES TO EXTEND BELOW THE FROST LINE FOR
YOUR REGION; 914 - 1220mm [36"-48"] BELOW FINISHED
GRADE.
6.
PLACE THE POSTS (ATTACHED TO THE ASSEMBLED
PANEL) INTO PRE-DUG HOLES:
6.a.
ENSURE BOTTOM OF BASE-'T' IS FLUSH WITH FINISHED
GRADE OF SURROUNDING SURFACES.
6.b.
LEVEL THE PANEL LEFT TO RIGHT.
7.
FILL SONOTUBES WITH POST-MIX CONCRETE AS PER
CONCRETE MANUFACTURER'S INSTRUCTIONS.
8.
FOOTING TO BE NON-VISIBLE; TOP OF CONCRETE TO
REMAIN AT LEAST 102mm [4"] BELOW FINISHED SURFACE.
9.
FINISHED SURFACE AROUND THE PANEL MUST BE LEVEL
FOR THE ENTIRE LENGTH OF THE PANEL.
10. FOLLOW ADJACENT SURFACES DETAILS.
11.
RESTORE ADJACENT SURFACING TO PRE-CONSTRUCTION
CONDITION UNLESS OTHERWISE SPECIFIED.
FOOTING SECTION
915 - 1220mm
[36"-48"]
2527mm [99 1/2"] O.C.
2667mm [105"]
1435mm [56 1/2"]
℄
℄
FINISHED
GRADE
0.00m
[+0"]
TOP OF
FOOTING
-0.10m [-4"]
CAP
FRAME
POST
FRONT ELEVATION
BASE-'T'
FLUSH WITH
FINISHED
SURFACE
PRODUCT NUMBER
PAGE
SCALE @ 8.5x11
DRAWN
CHECKED
PHONE NUMBER:
1-877-733-7456
COPYRIGHT © 2018 NATURE'S INSTRUMENTS. DO NOT SCALE DRAWINGS. NOT FOR COMMERCIAL USE OR REPRINT WITHOUT EXPRESSED WRITTEN PERMISSION FROM NATURE'S INSTRUMENTS.
1 OF 1
1:25
PR
DR
CHALKBOARD PANEL: POST MOUNT
NI-PG-301-01
INSTALL DRAWING
