877-565-1457
7
EcoBreeze 2.1 can be customized for different conditions or user preferences.
The standard settings for EcoBreeze 2.1 are:
Fan Speed – 6 for 225 square foot room
Display Light setting - High
Filter change – 500 hours
Temperature scale – Fahrenheit
The settings can be changed by pressing the setting button. It will revert back to the run operation when it does not
sense any additional input for 10 seconds.
First press of button –
Displays thousands and hundreds of hours of fan run time
Second press of set button
- Displays tens and single digit of hours of fan run time. The unit only has 2 positions on the
display so combining the first and second display would give lifetime run hours. I.e. 01, 95 would be 0195 hours of fan
run time. This will provide information on actual hours of natural cooling that the fan is providing. (Like a car odometer)
Third press of the set button –
Displays the outdoor temperature
Fourth press of the set button –
Displays the indoor humidity dew point temperature
Fifth press of the set button –
Displays the outdoor humidity dew point temperature
Sixth press of the set button –
Customize the
Maximum
fan
speed for the auto mode. The settings are 1-10. Press + or
– to raise or lower the maximum speed. A larger room will require a higher setting. Suggested settings are as follows:
6 – 225 square foot room
9 – 300 square foot room
Seventh press –
Customize display light level
1 – dim
2 – Medium
3 – Full
Eighth press of set button –
displays the hours remaining until the filter needs to be changed. Press +/- to reset to the
maximum hours
Ninth press of the set button –
Filter change. Customize the hour of run time between filter changes. The hours are
the display times 10. A display of 50 represents a setting of hours. This is preset at 500 hours. For an area with a high
level of outdoor pollution decrease the hours between changes. For areas with a low level of outdoor pollution increase
the hours. Press + or – to raise or lower the hours.
Tenth press of the set button –
Select temperature scale. Press + or – to toggle between Fahrenheit or Centigrade.
Push set Display
Push set Display /
-
1
st
Hours of run time - thousands & hundreds
2
nd
Hours of run time – tens and single digits
3
rd
Outdoor Temperature
4
th
Indoor dew point
5
th
Outdoor dew point
6
th
Maximum fan speed
1 low, 10 high
7
th
Light level
1 dim, 3 bright
8
th
Filter Hours Remaining reset to max
9
th
Max Filter hours (x10) 10 to 100
10
th
Temperature scale
F or C
