Electronic pellet burner controller - NPBC-V6T-2
By pressing the button ,the module will switch to
Access point
mode by displaying the screen
below, the name of the new network, the password and the encryption method that must be
entered.
The Network and Security fields can be filled in automatically only if the button for scanning
nearby Wi-Fi networks is pressed and the desired network is selected from the suggested list. In
this case, you only need to enter the password. After all the fields are filled in, it is necessary to
press the
button to confirm, and the data is sent to the WiFi module.
When you press the button to scan nearby WiFi networks, the screen below displays information
about the number of all of the found networks.
When the scan is complete, a list of all the found networks will be displayed and the user will be
able to select his network. If his network is not in the list, with the button it is possible to return
to the previous screen and start a new search. If no network is detected, the screen automatically
returns to its previous state, where a new search can be started or the data can be entered manually
using the virtual keyboard.
User Manual / ver. 1.2
http://www.naturela-bg.com/en/
page 29 of 41
Name's of a new
WiFi network
Scan button for
nearby networks
Founded networks
