Electronic pellet burner controller - NPBC-V3M
The following pressing the
Enter
button forwards to the first screen with factory settings. Browse the
menus by pressing the arrow buttons:
▲
forwards to the next menu and
▼
returns to the previous. If
you want to change the parameters in the currently displayed menu, press the
Enter
button again. In
the upper right corner of the screen appears the sign , which indicates the Edit mode:
In this mode the buttons have the following functions:
•
the arrow buttons
▲
or
▼
change the value of the currently blinking parameter in the relevant
direction;
•
the
Enter
button switches to the next editable parameter;
•
the
F
button saves the changes in the current menu and exits the Edit mode
;
•
if no buttons are pressed for a certain time, the controller goes back to its main screen without
saving the settings in the currently displayed menu.
To exit the factory settings press
F
and confirm your choice with
Enter
:
Factory settings are as follows:
Cleaning on Start
– set the work time for the main (
Fan
) and the additional (
Cleaner
) air fan for
the cleaning cycle before ignition
Cleaning on Stop
– set the work time for the main (
Fan
) and the additional (
Cleaner
) air fan for the
User Manual / version 2.6
http://www.naturela-bg.com/en/
page 15 of 27
Sign for Edit mode
