NRC-6-SV
Room Thermostat and Remote Control Module
14
No Exec module
---
No connection with the Executive module
15
Power On
---
Date and time when the power supply to the
controller was turned on
16
Power Off
---
Date and time of controller operation before the
power supply to the controller was switched to off
17
Reset
---
Date and time when the controller's software or the
information in the Diagnostics screen has been
reset.
OR
First record after restarting of the controller or
after deleting of the buffer for diagnostics.
While on the “
Diagnostics
” screen, if you press the left navigation button (◄), you will be
redirected back to the
“Information”
screen.
When the error messages are displayed in red color on the bottom line of the main screen,
they can be cleared by two ways:
•
For all the messages with permitted automatical cleaning, errors will be cleared
on their own, as long as the issue has been resolved.
•
The second way for an error message to be cleared is manually. While in the
“Main screen” page, by pressing the left navigation button for more than 2
seconds will remove the error message.
Settings of the operation parameters
Ways to change operation parameters
When the operational parameters of the controller are being set, the screen will be displaying
one of the following options:
•
A list choice- The red bar indicates the currently highlighted row. Press the up or
down navigation button (▲ or ▼) to move the bar. By pressing the right navigation
button (►) you confirm the selection and move to the next screen. An arrow pointing
down at the bottom of the screen or up on the top of the screen indicates that there are
more options in the corresponding direction outside of the visible area of the screen.
User Manual Ver 3.3
p.14 /21
