Page
4
of 9
•
High-speed cooling fan
To keep the inverter cool, the fan turn on
depend on temperature in the inverter.
The fans do not run when the inverter
is turned off.
•
Positive Battery Cable Terminal (Red)
•
Negative Battery Cable Terminal
(Black)
FEATURES
•
ON/OFF rocker switch
•
LED indicator
Green indicates Power ON
Red indicates Overload/Interruption
in power
•
12 Volt power cord
•
120V standard AC outlets (2)
•
USB port(s) – 5V, 2.0A
CONNECTING INVERTER CABLES
TO GROUND THE INVERTER
1.
Turn off and disconnect the inverter.
2.
Locate the chassis ground screw on
the back of the inverter.
3.
Remove the outer nut and loosen
the first locking washer.
4.
Attach the grounding wire’s ring
connector to the ground terminal of
the inverter.
5.
Tighten the locking washer securely.
Then, replace the other nut and tighten
it securely.
The inverter and power source must be in
the OFF mode.
IMPORTANT:
Make sure to connect your
inverter only to a 12 volt power supply.
To avoid electrical shock, it is necessary
to ground the inverter as well as the
device powering it. The inverter should
be grounded, using a 1
5
AWG copper
wire (included).
NOTE:
Do not turn on the inverter or the
power source until the inverter and the
power source are grounded.
