6
7
The device is only intended for the use described above.
Never use it for any purposes other than those described in the current instructions
for use.
You must never repair, dismantle or modify the device yourself.
This device is not suitable for use outdoors, in a medical setting, or for public
information. It is intended for private use only.
Caution! Warnings:
Keep the device and its batteries out of reach of children.
Never throw the batteries in the fire, short-circuit them, dismantle them or
recharge them. Risk of explosion! The batteries contain acids that are harmful
to health. Weak batteries must be replaced as quickly as possible, in order to
avoid any leaks. Never use old batteries with new batteries at the same time
or different types of batteries. Use specially adapted protective gloves
and protective glasses to handle batteries that have leaked!
Important advice regarding product safety!
Avoid exposing the device to extremes of temperature, vibrations or shocks.
Keep it away from humidity.
The weather station works with 2x AAA, IEC LR3, 1.5V batteries (not included).
Proceed as follows in order to install and replace the batteries:
1. Use your thumb to lift the cover to open the battery compartment.
2. Insert the batteries according to the correct polarity (refer to the markings
inside the compartment).
3. Replace the lid on the battery compartment.
• Temperature measurement ranges:
from 0 to 50ºC (from 32ºF to 122ºF)
• Humidity measurement range:
from 20% to approximately 99%
• Screen:
max/min temperature and
humidity records
•
Time and alarm
SPECIFICATION:
FOR YOUR SAFETY:
INSTALLING THE BATTERIES:
OPERATION:
Start by installing the batteries in the weather station.
Press MODE once to view the alarm time.
TO SET THE TIME:
• Hold down MODE for 3 seconds to enter the time settings mode.
• The 24h mode will flash: then press UP or DOWN to select 12h or 24h.
• Press MODE again.
• The time figures will flash and can be amended by pressing UP or
DOWN to adjust the time.
• Press MODE again.
• The minutes figures will flash and can be amended by pressing UP or
DOWN to adjust the minutes.
• Press MODE again.
• C will flash: press UP or DOWN to change and indicate the temperature
in Celsius (C°) or Fahrenheit (°F).
ALARM SETTINGS
• Press MODE once to view the alarm time.
• Hold down MODE for 3 seconds to enter the alarm settings mode.
• The time figures will flash and can be amended by pressing UP or DOWN
to adjust the time.
• Press MODE again: The minutes figures will flash and can be amended
by pressing UP or DOWN to adjust the minutes.
ALARM ACTIVATED/DEACTIVATED
• Press DOWN to activate/deactivate the alarm.
MAX / MIN
• Press UP to see the MAX temperature and humidity records.
• Press UP again to see the MIN temperature and humidity records.
• Press up for 3 seconds to delete the temperature and humidity.
HUMIDITY INDICATOR DISPLAY
dry
Humidity
< 40%
Temperature:
20°C - 22°C or
26°C - 28°C
Humidity:
40 % - 54 %
Temperature:
20°C - 22°C or
26°C - 28°C
Humidity:
66 % - 74 %
Temperature:
22,1°C - 25,9°C
Humidity:
40 % - 74 %
Temperature:
< 20°C or
>28°C
Humidity:
40 % - 74 %
Humidity
> 75 %
intermediate
comfort
intermediate
wet
no display
