∅
22cm - H10.6cm
Assembly instructions
To avoid splashing, the bevelled section of the tube must be
installed face upwards in the opposite direction to the bamboo bevel.
In order to guarantee the optimal lifespan of your fountain:
· Rinse the stones before placing them in the pot.
Run the stones under water in order to eliminate any impurities that could affect
the function of the pump.
· Always maintain the water level higher than the pump.
Regularly top up the water level to compensate for evaporation.
· Clean the pump propeller regularly.
Regularly run the pump propeller under water in order to extend its lifespan.
· If possible, use non-calciferous water.
Opt for the use of demineralised water or a mixture of 50/50 tap/demineralised
water.
· Place the stones under the waterfall, level with the pump in order to balance
the set-up. Place the stones so as to stabilise the pump and avoid any toppling in
the event of movement near to the fountain.
· The pump tube must be as straight as possible
Ensure that the tube is placed as straight as possible to ensure perfect results.
· Run the pump's electrical wire away from the fountain.
To limit any electrical risk, run the pump's electrical wire away from the fountain.
