
3. ROUTE WIRING FROM MOTOR TO BATTERY
Starting at the motor, insert wiring under the starboard (facing forward, the right) rail
and into the wire clamps. The wire clamps are factory installed.
Continue to the rear of the boat to the last wire clamp closest to the battery.
4. CONNECT WIRE LEADS TO BATTERY
Connect cable leads to the battery as shown, red wire to positive, black wire to
negative. Tighten nuts securely.
Replace the battery cover as shown.
RED
BLACK
IMPORTANT! BE SURE TO CONNECT RED WIRE TO THE POSTIVE
TERMINAL AND BLACK WIRE TO THE NEGATIVE TERMINAL!
DO NOT TOUCH BOTH THE POSITIVE TERMINAL AND THE
NEGATIVE TERMINAL AT THE SAME TIME!
BATTERY CAN BE POSITIONED
EITHER IN FRONT OR BEHIND THE
THWART TO ADJUST BOAT TRIM