Native Watercraft Ultimate FX 15, Руководство пользователя, Страница: 11 / 16

11
NOTE: You should re-insert the foot rest from the stern
end with the pad facing the paddler. Then slide the rest
onto the track and push the control rod forward. Refer to
page 4 for adjustment.
6. Re-insert Large Foot Rests into Center set of Foot Rails
7. Install Thwart in Solo Position
The Thwart will go in the holes you uncovered in the front
most pads. Make sure that the rod lays are facing the paddler
when you insert the thwart studs into the holes. Be very careful
not to damage pads! Re-install the wing nuts and hand tighten.
You are ready to paddle!
NOTE: You will need to readjust seat, foot rests, and trim.
Refer to pages 3, 4, and 5.
Accessory offered for your Solo conversion.
Call or visit your local Dealer for details.
Ultimate FX Foot Pad Kit