Native Watercraft Propel Pedal drive, Руководство пользователя, Страница: 3 / 12

3
Retrieve your thwart tube from
your kayak and insert the tube
through one side of the thwart tube
clamp.
Center the thwart tube on the
thwart clamp.
Assembly Instructions
Step 1. Install Thwart Tube
Secure the thwart tube in place by tightening the screws to 35 in/lbs (4Nm) of
torque, utilizing the included 4mm hex wrench . This is just enough pressure
to keep the bar from spinning when rotated with a firm grip.
Do not over tighten these two screws. Over tightening will result in
damage not covered under warranty.
Correct
Incorrect