Native Instruments Retro Machines MK2, Руководство пользователя

Страница: 16 / 19

▪
OCTAVE : Sets the octave displacement, i.e., the distribution of the arpeggio pattern in
various octaves. The arpeggio pattern cycles from the played octave to the octave set
upwards.
▪
VEL : Set the velocity of the individual steps with the velocity sliders. Cmd-click a slid-
er to set it to zero, Alt-click it to set it to maximum velocity.
▪
INIT : Initializes the rhythmic grid and sets all sliders to maximum. When alt-clicking
this button, all active sliders (all sliders greater than zero) will be randomized.
▪
CLEAR : Clears the rhythmic grid, i.e., sets all sliders to zero. When alt-clicking this but-
ton, all variation steps will be randomized.
▪
SOUND VARIATION : Select a Sound Variation for the corresponding step here (click on a
field and drag up/down to select one of the eight variations).
▪
CLEAR (lower): Clears the Sound Variation grid. When alt-clicking this button, the var-
iation steps for all active sliders (all sliders greater than zero) will be randomized.
2.2.2 CHORD Section
RETRO MACHINES MK2 features an advanced approach to playing chords. The Chord
Player creates chords from single notes, which is especially useful in combination with the
arpeggiator.
The Chord section.
Controls
▪
CHORD (on/off switch): Activates/deactivates the Arpeggiator.
The CHORD feature cannot be used when SOLO is engaged on the SYNTH page.
▪
FIXED CHORD : If enabled, each note of the chromatic scale will be harmonized with the
same chord. Otherwise each note of the chromatic scale can trigger a different chord.
Using the Instrument
ARP/CHORD Page
RETRO MACHINES MK2 - Manual - 16