The MIDI sockets on the rear panel of the MASCHINE controller.
To connect your external MIDI equipment:
1.
Connect the device receiving MIDI signals to the
MIDI OUT
socket on the rear panel of
the MASCHINE controller using a 5-pin DIN MIDI jack.
2.
Connect the device sending MIDI signals to the
MIDI IN
socket on the rear panel of MA-
SCHINE controller using a 5-pin DIN MIDI jack.
→
The MIDI equipment is connected.
Depending on your use case, additional configuration is required in the software:
▪
If MASCHINE is running as a stand-alone application, you need to activate the correspond-
ing MIDI inputs and outputs of your MASCHINE controller on the
MIDI
page of the
Prefer-
ences
.
▪
If MASCHINE is running as a plug-in in a host, the MIDI configuration is managed by the
host.
Setting Up MASCHINE
Setup Examples
MASCHINE - Setup Guide - 21
