Native Instruments Guitar Rig Session, Справочник по аппаратуре

Страница: 12 / 47

GUITAR RIG SESSION – 12
3
This LED indicates clipping at Input 1 / Input 2 and therefore should not be lit when you
play.
4 This shows the selected input signal type (Instrument, Line) for Input 2.
5 This LED shows whether phantom power is activated.
3.3 Rear Panel
1 These jacks transmit the signal received from your computer. The TRS outputs work with
balanced and unbalanced connectors. Make sure both are connected for stereo sound.
2 This port accepts a Kensington™-compatible security cable lock. Use this to secure your
unit from theft.
3 The USB port connects the unit to your computer. Your computer must support USB
2.0 in order to work with GUITAR RIG SESSION I/O. The unit also relies on the USB bus
power to function. Connect this unit directly to your computer’s USB 2.0 port and avoid
using un-powered USB hubs.
4 The 48V Phantom Power switch will apply phantom power to the XLR microphone input
(1). Condenser microphones rely on phantom power while other microphones don’t. Make
sure that phantom power is turned off before connecting a dynamic or ribbon microphone
is connected to prevent serious damage.