12.2. Modulation Envelope
When triggered, the envelope adds a modulation signal that varies over time in a non-periodic way.
The
Modulation Envelope
module contains the following settings and options:
The Modulation Envelope module.
•
Envelope mode selection menu
: The two envelope symbols on the right side of the module
header let you choose between two basic types of volume envelopes:
•
AHDSR
(left): An AHDSR (Attack, Hold, Decay, Sustain, Release) envelope. Typically the
AHDSR envelope is for samples with a significant sustain time (especially when played
from a MIDI keyboard).
•
AHD
(right): A simple AHD (Attack, Hold, Decay) envelope. This envelope is well suited for
one-shot sample playback.
•
Curve knob
: Adjusts the shape of the envelope curves from concave to linear (0) to convex.
•
Attack knob
: Adjusts the time it takes for the envelope to reach its maximum level.
•
Hold knob
: Adjusts how long the envelope will remain at its maximum level. Set this to
10-30ms to add punch to a signal.
•
Decay knob
: Adjusts the time it takes for the envelope to fall from the held level to the sustain
level.
•
Sustain knob
: Adjusts the level maintained in the sustain phase as long as the incoming MIDI
note is held. The Sustain control is not available in AHD mode.
•
Release knob
: Adjusts the time it takes to return to zero level after receiving a MIDI note-off
command (for instance, the MIDI trigger ends). Release control is not available in AHD mode.
12.3. Modulation Slots
This module provides up to eight modulation paths on two pages (
1 - 4
and
5 - 8
), each selected
by a corresponding drop-down menu.
A modulation path consists of a modulation source and a modulation destination. The amount
slider determines the amount of modulation.
Note that certain modulation sources cannot be routed to specific targets. Therefore,
these targets will not be available from the corresponding modulation destination
selection menu on the right side.
The
Modulation Slots
module contains the following settings and options:
MODULATION PAGE
43
Содержание BATTERY 4
Страница 1: ......
Страница 45: ...Output Adjusts the output level of the module EFFECTS PAGE 41...