National Crank Скачать руководство пользователя страница 3

Страница: 3 / 5

Electric Assembly Instructions

1. Line up J-Rails to the Columns and attach using

the M6x12mm Socket head screws provided.

Fig. 1

Fig. 4

Fig. 2

2. Attach the top support to the leg column

using the M6x12mm flat head screws

provided. (Fig. 2)

3. After step 2 is complete, flip the assembly

over onto the bottom side of the table top.

4. Attach the feet to the columns using the

M10x20mm Button Head Screws provided.

While making sure they are pointing the

same way as the top supports. (Fig. 3)

5. Below is a layout of how a proper assembly

should look. (Fig. 4)

PLEASE NOTE:

To synchronize the control and motors plug in all of

the control cables, power cable, and the switch.

Hold the down button until the unit bottoms out,

you will hear a clicking sound and the columns will

move slightly upward.

If you lose power to the unit you will have to

re-synchronize.

REQUIRED TOOLS:

#2 Phillips Driver

Metric Allen Wrenches

EACH TABLE INCLUDES:

Column Kit

J-Rail Kit

Foot Kit w/ Top Supports

Fig. 3

Содержание Crank





