Assembly Instruction
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part # 3112080
Rev, A
Printed in U.S.A
© 2018 Kimball International, Inc.
Alloy
Ceiling Power/Data Pole
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
3
Install pole wire divider into main pole casing. There are 3 positions the
wire divider can be installed in, select a position based on the needs of
the application. Ensure the divider is fully seated onto mounting profile.
(Figure C)
Note: If the middle profile is used for the wire divider the piece
needs to be offset from the end of the case by
3”
min. to allow
for clearance for the glide mounting screw when installed.
(Figure D)
Figure C:
Figure D:
Offset for center position
only