Software Introduction
9
SLWU055A – May 2008 – Revised May 2016
Copyright © 2008–2016, Texas Instruments Incorporated
TSW3070EVM: Amplifier Interface to Current Sink DAC - Arbitrary Waveform
Generator Demonstration
Install the drivers automatically as recommended. Click
Next
.
Click Continue for the digital signature. The drivers were installed during the software installation and will
be installed automatically. If asked to overwrite newer drivers, click
Yes
. Click
Finish
to complete the
driver installation. If a DAC5682 EVM driver has been previously installed, Windows Hardware Wizard
may not require the drivers to be installed and these steps will not be required.
The software can now be started from Start
→
All Programs
→
Texas Instruments DACs
→
DAC5682z
EVM Control.
5
Software Introduction
The DAC5682Z EVM control software allows you to:
•
Configure the DAC5682Z and CDCM7005 registers
•
Save and load these register settings to/from the text files
•
Visualize the data path through the DAC5682Z
•
Download a pattern to the Texas Instruments TSW3100 Pattern Generator System, an FPGA-based
LVDS/CMOS pattern generator, from the TSW3100 EVM tool folder
(
http://www.ti.com/tool/tsw3100evm
).
