INA260EVM GUI Software
19
SBOU180 – November 2016
Copyright © 2016, Texas Instruments Incorporated
INA260EVM-PDK and Software Tutorial
Additionally, the supply voltage (V
DUT
) is set to 3.3 V by default, but if necessary the 5-V option can be
selected, as shown in
Figure 12. V
DUT
Selection
With the INA260 powered on, the analog input sources can now be enabled.
discusses the GUI configuration and data collection using this setup.
4
INA260EVM GUI Software
The INA260EVM GUI is a collection of software tools that make it easy for the user to explore the key
behaviors of the INA260. The following tools are available:
•
The
Configuration
tool simplifies the INA260 setup prior to evaluation testing
•
The
Graph
tool plots the acquired data and exports to a file if necessary
•
The
Registers
tool displays and modifies the contents of the user-accessible registers
Each tool has a dedicated page that can be accessed by clicking on the corresponding tab on the GUI.
The tabs are organized intuitively from left to right in the proper order, and the GUI always displays the
Configuration
page immediately after startup. Measurement data can be monitored using the
Results Bar
at the bottom of the GUI window. In most cases (gross) testing can be performed using just the
Configuration
tool and the
Results Bar
; the
Graph
and
Registers
tools may only be needed in special
situations.
