3b. Use a universal bracket assembly for the side
closest to the off-going ramp.
Use a switchback bracket on the other end
(corner of platform).
Tip: It may help to loosely assemble the vertical
picket handrail to the switchback bracket, then
slide entire assembly into the channel.
3c. Once the first inside corner vertical picket
handrail is assembled to the platform channel,
snug the serrated nuts but don’t fully tighten to
allow for adjustment after all handrails have
been installed.
We are ready to install the other inside vertical
picket handrail to the tongue side of the
platform.
