Introduction
Ÿ
Do not attempt to charge a non-rechargeable or battery other than 12V.
Ÿ
Do not attempt to use Lithium batteries with the Power Pack II
Ÿ
Keep cables away from sources of high temperature.
Ÿ
Before installation, read the instructions carefully.
Ÿ
Do not use for any purpose other than indicated in this manual.
Ÿ
Avoid open flames in the vicinity of the battery.
Ÿ
Before installation, disconnect any existing batteries.
SAFETY INFORMATION :
Ÿ
The Portable Power Pack is intended for use with 12V lead-acid batteries only.
Ÿ
Do not alter or modify the Portable Power Pack under any circumstances.
Ÿ
Never attempt to charge a damaged or leaking battery.
Ÿ
Do not expose the Portable Power Pack to liquids. Do not immerse in water.
Ÿ
Unauthorized disassembly, repairs or modifications will void any warranty.
Ÿ
Attempts to use the Portable Power Pack for purposes other than indicated in this
manual will void the warranty.
Ÿ
Ensure all connections are secure and cables are installed in a safe manner.
Ÿ
Ensure cables are not clamped or pinched.
Ÿ
Ensure the Portable Power Pack is secured in mobile applications.
Ÿ
Use the correct cabling size and fuses in accordance with the installation instructions.
The Portable Power Pack II is a dual-battery system and isolator for use in automotive applications.
The Power Pack II features a dual-display that can show the respective voltages of the main battery and
auxiliary battery. The respective displays can be switched to show charge current and load current.
It allows an auxiliary battery to charge when the vehicle is running and isolates it from the main battery
when the vehicle is turned off. This prevents the main battery being drained by accessories such as
fridges, lights, pumps, fans, etc.
Battery status, system status and preferences can be viewed and configured on a Bluetooth-connected
smart device using the new CONNECT application.
The Power Pack offers a variety of power outputs including standard automotive sockets (cigar type),
Hella type, USB charge ports and heavy-duty 50A couplers.
Supported battery types :
Lithium-based batteries are not supported
including high-cycle / deep-cycle variants of these.
Ÿ
12V Lead-acid (Calcium, Flooded, AGM, Gel, VRLA)
Max battery size :
Ÿ
350mm x 180mm x 270mm (L x W x H)
2
Battery charge performance will be affected by the alternator voltage.
The Portable Power Pack II relies on the vehicle alternator to provide charge.
It is intended for use in vehicles with alternator voltage above 13.5V.
NOTE :
