National Instruments USRP-2974, Руководство по началу работы

Страница: 6 / 18

Adding Hardware to LabVIEW Communications System Design
Suite
You must add your USRP-2974 to LabVIEW Communications System Design Suite before
you can use it to run code.
Related Information
Why Can't I Detect My Device in LabVIEW Communications System Design Suite? on page
9
What is the IP Address of My Device? on page 9
Adding Hardware to LabVIEW Communications System Design Suite 2.1 to
Current
1. Open LabVIEW Communications System Design Suite and select the Hardware button
to open SystemDesigner.
2. Right-click anywhere in SystemDesigner and select Add hardware . Alternatively, select
the + button.
3. In the Discovered hardware tab, select the USRP-2974 you want to register. Click Add .
Note If your device is not listed in the Discovered hardware tab, open the
Add hardware by address tab and type the IP address or hostname of your
device in the IP address/hostname field. Click Connect .
Note By default, the user name is
root
, and the password is blank.
4. Click Close .
Adding Hardware to LabVIEW Communications System Design Suite 2.0
1. Open LabVIEW Communications System Design Suite and select the Hardware tab.
2. Select Network Systems to display USRP-2974 devices that you can reserve to use in
projects on the computer.
The device and the computer must be connected to the same local network.
3. In the Unregistered Systems category, select the icon of the USRP-2974 you want to
register.
4. Click Register .
Note
If your USRP-2974 does not appear in the Unregistered Systems
category, type the IP address or hostname in the Register by IP or Hostname
field.
5. Add or verify the Hostname or IP Address , User name , and Password .
Note By default, the user name is
root
, and the password is blank.
6. Click Register .
6 | ni.com | USRP-2974 Getting Started Guide