•
Additional SMA (m)-to-SMA (m) cables to connect both channels with external devices
or to use the REF IN and PPS IN signals
•
GPS antenna for devices with GPS disciplined oscillator (GPSDO) support
Environmental Guidelines
Notice
This model is intended for use in indoor applications only.
Environmental Characteristics
Temperature and Humidity
Operating Temperature
0 °C to 45 °C
Operating Humidity
10% to 90% relative humidity, noncondensing
Pollution Degree
2
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient temperature)
Shock and Vibration
Operating shock
30 g peak, half-sine, 11 ms pulse
Random Vibration
Operating
5 Hz to 500 Hz, 0.3 g
rms
Nonoperating
5 Hz to 500 Hz, 2.4 g
rms
Installing the Software
You must be an Administrator to install NI software on your computer.
1.
Install an application development environment (ADE), such as LabVIEW or LabVIEW
Communications System Design Suite.
2.
Follow the instructions below that correspond with the ADE that you installed.
Installing the Software Using NI Package Manager
Ensure that you have installed the latest version of NI Package Manager. To access the
download page for NI Package Manager, go to
and enter info code
NIPMDownload
.
Note
NI-USRP versions 18.1 to current are available to download using NI
Package Manager. To download another version of NI-USRP, refer to
Installing the
Software Using the Driver Download Page
.
1.
To install the latest NI-USRP instrument driver, open NI Package Manager.
2.
On the
BROWSE PRODUCTS
tab, click
Drivers
to display all available drivers.
4
|
ni.com
|
USRP-2930/2932 Getting Started Guide
