National Instruments USB-6211 OEM, Руководство пользователя

Страница: 13 / 14

© National Instruments Corporation 13 NI USB-621x OEM User Guide
2. Edit the device INF file by opening
nimioxsu.inf
with a text editor.
At the bottom of this file are the descriptors where Windows looks to
identify the device. Locate the two lines of text that contain in quotes
the descriptors for the device name you are modifying. Change the
descriptor on
both lines to the new device name, as shown in Figure 13.
Figure 13. INF File Descriptors Changed to “My Device” (Windows 2000)
3. Save and close the INF file.
4. Go to the Windows Device Manager, right-click the OEM device under
Data Acquisition Devices, and select
Uninstall .
5. Disconnect the USB cable from your PC.
When you reconnect the device, it appears as
My Device
in the Found New
Hardware Wizard and Windows Device Manager, as shown in Figure 14.
Note When the device is initially installed, the Windows alert message may display the
following:
Found New Hardware: M Series USB 621
x (OEM)
. This message appears
for a few seconds until the custom name appears and the Found New Hardware Wizard is
launched. This alert message device name cannot be changed.
Original File
Modified File