manualshive.com logo in svg

National Instruments TPC-2515, Руководство пользователя, Страница: 14 / 47

Поделиться
Скачать
National Instruments TPC-2515 Скачать руководство пользователя страница 14

Chapter 2

System Setup

PPC-2115/TPC-2515 User Manual

2-4

ni.com

Dual Display Setting

To use an auxiliary CRT monitor with the PPC-2115/TPC-2515, connect 
the monitor to the CRT port on the PPC-2115/TPC-2515. Follow these 
steps to configure the CRT monitor settings:

1.

After powering on the system, click the Intel icon in the toolbar on the 
PPC-2115/TPC-2515 LCD monitor.

2.

Select 

Graphics Options»Output Device

.

3.

The display options window appears, showing the currently active 
display device. Use this window to select and configure alternate 
display devices.

Panel Mounting

Follow these steps to mount the PPC-2115/TPC-2515 in a panel:

1.

Be sure the adhesive waterproof gasket on the front bezel is in position.

2.

Install the PPC-2115/TPC-2515 into the panel opening. (Refer to 
Appendix A, 

Specifications

, for cutout dimensions.)

3.

Attach the clamps included in the accessory pack to the holes in the 
bezel.

4.

Insert the screws included in the accessory pack into the clamps. 
Tighten the screws to fasten the PPC-2115/TPC-2515 against the 
panel.

Note

The mounting panel thickness should be less than 6 mm (0.236 in.).

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание TPC-2515
















































Отзывы:

Нет отзывов