National Instruments
™
, NI
™
,
ni.com
™
,
and SCXI
™
are trademarks of National Instruments Corporation. Product and company names mentioned herein
are trademarks or trade names of their respective companies.
371218A-01 Copyright
©
2001 National Instruments Corp. All rights reserved. July 2001
INSTALLATION GUIDE
TBX-96 T
ERMINAL
B
LOCK
This guide describes how to install and use the TBX-96 terminal block with
the SCXI-1100, SCXI-1102B/C, SCXI-1104/C, and SCXI-1581 modules.
The TBX-96 is a shielded, DIN-rail mountable terminal block with
96 screw terminals for easy connection to the SCXI-1100, SCXI-1102B/C,
SCXI-1104/C, and SCXI-1581 front connector. The TBX-96 mounts on
most European standard DIN EN mounting rails.
What You Need to Get Started
To set up and use the TBX-96, you need the following:
❑
TBX-96 terminal block
❑
TBX-96 Terminal Block Installation Guide
❑
SCXI chassis and its documentation
❑
One of the following modules and its documentation
–
SCXI-1100
–
SCXI-1102B/C
–
SCXI-1104/C
–
SCXI-1581
❑
SH96-96 shielded cable or R96-96 ribbon cable assembly that includes
the TBX cable adapter
❑
Wire strippers
❑
Combination flathead/Phillips screwdriver (included in kit)
