NI TB-2630 Installation Instructions
10
ni.com
4. Install the Terminal Block
To connect the TB-2630 terminal block to the PXI-2530 front panel,
complete the following steps.
Note
The NI PXI-2530 should already be installed in a PXI chassis.
1.
Plug the TB-2630 into the front connector of the PXI-2530.
2.
Tighten the top and bottom chassis screws on the back of the terminal
block rear panel to hold it securely in place.
ch22
BANK 2, PIN 7
BANK 3, PIN 7
BANK 6, PIN 7
BANK 7, PIN 7
ch23
BANK 2, PIN 8
BANK 3, PIN 8
BANK 6, PIN 8
BANK 7, PIN 8
ch24
BANK 2, PIN 9
BANK 3, PIN 9
BANK 6, PIN 9
BANK 7, PIN 9
ch25
BANK 2, PIN 10
BANK 3, PIN 10
BANK 6, PIN 10
BANK 7, PIN 10
ch26
BANK 2, PIN 11
BANK 3, PIN 11
BANK 6, PIN 11
BANK 7, PIN 11
ch27
BANK 2, PIN 12
BANK 3, PIN 12
BANK 6, PIN 12
BANK 7, PIN 12
ch28
BANK 2, PIN 13
BANK 3, PIN 13
BANK 6, PIN 13
BANK 7, PIN 13
ch29
BANK 2, PIN 14
BANK 3, PIN 14
BANK 6, PIN 14
BANK 7, PIN 14
ch30
BANK 2, PIN 15
BANK 3, PIN 15
BANK 6, PIN 15
BANK 7, PIN 15
ch31
BANK 2, PIN 16
BANK 3, PIN 16
BANK 6, PIN 16
BANK 7, PIN 16
Table 3.
32 x 1, 4-Wire Topology Terminal Mapping (Continued)
Software Name
Hardware Name
A+
A–
B+
B–
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
