Chapter 2
Configuration and Installation
©
National Instruments Corporation
2-23
Figure 2-8.
Assembling and Mounting the SCXI-1330 Connector-and-Shell Assembly
SCXI-1320, SCXI-1328, and SCXI-1321
Terminal Blocks
The second type of connector available to connect the transducers to the
SCXI-1121 inputs is a terminal block with an onboard temperature sensor
and screw terminals for easy connection. One terminal block, the
SCXI-1328 isothermal terminal block, has a high-accuracy onboard
temperature sensor. The terminal block kits are listed in the
section in Chapter 1,
The terminal blocks consist of a shielded board with supports for
connection to the SCXI-1121 input connector. The terminal blocks have
18 screw terminals for easy connection. Four pairs of screw terminals are
for signal connection to the four inputs of the SCXI-1121, four pairs are for
Mounting Screw
Lock Washers
Nut
Jack
Screws
Grounding Screw
Mounting Screw
Nut
Shell Assembly
SCXI-1121 Module
Shell Assembly
Connector